Click on the image to check the artwork
Product Introduction
TAC B series ball screw bearings have a high axial stiffness due to a large number of balls and a contact angle of 60 °. The starting torque of this type of bearing is low, so it can rotate smoothly with a small driving force.
TAC B series ball screw bearings 25TAC62B use ultra-pure steel for the inner and outer rings, thereby further extending the service life.
This series bearings has a "DG" seal, a low-torque contact seal, and with "WPH" grease, a waterproof grease, which increases reliability and is easy to handle.
Product Specification
Bearing No.: |
25TAC62B |
Main dimensions |
d: 25mm x D: 62mm x B: 15mm |
Inside diameter(ID d) |
25 mm |
Outside diameter(OD D) |
62 mm |
Thickness/width(T/B/H) |
15 mm |
Limiting speeds Grease(rpm) |
4500 r/min |
Limiting speeds Oil(rpm) |
6000 r/min |
Mass(kg) |
0.252 |
Type |
Super Precision Bearings |
Description |
Ball Screw Support Bearings TAC B Series |
Product feature and application
Ball screw bearing 25TAC62B belongs to Angular contact thrust ball bearing.
It will usually be more than two bearings used in pairs and applications to metal cutting machine tools, forging and pressing machinery, casting machinery, woodworking machinery, etc.
Compared with standard angular contact ball bearings, Ball screw bearings have a longer service life and better reliability.
Ball screw bearing 25TAC62B are smaller, but can support heavier load ratings, and they rely on their optimal design in all ball bearings.
Packaging:
1. Industrial packaging: plastic bag/plastic tube + kraft paper + carton + plywood pallets
2. Commercial packing: 1pc/plastic bag + color box + carton + plywood pallets
3. As the clients' requirement
Shipping:
By DHL, FEDEX, TNT, ARAMEX, etc.
By SEA
By AIR
http://www.hongkongbearings.com/